|
Ebola
Guest
|
 |
« on: March 08, 2010, 07:13:41 AM » |
|
I want to make 2 changes to housing, I need advice if anyone has ever done. 1. I want to give extra holes to mount 2 side panel 12cm venturi. He gave one, with the holes and what has been covered by filters, grilles .... etc.. 2. Isolation of additional housing deafening paint . is about the only solution besides those that are commercial insulation about nothing. Does anyone know anything dyes, method ....  Astept Multumesc tips |
|
|
|
|
|
Energy
Guest
|
|
« Reply #1 on: March 08, 2010, 10:38:04 AM » |
|
Money they give to the paint, and other small things that will cost some money, you better get a case with vent on side panel, one is enough, and you still put a stick in front of the air, and a to get back, and not you need anything. If you put 2 Venturi side panel, you vibrate in all sorts + the only way to give holes, is to drill and have a look ugly ..
|
|
|
|
|
|
Ebola
Guest
|
|
« Reply #2 on: March 18, 2010, 05:14:29 PM » |
|
Energy have the same case as you do a Nexus Clodius Black 1 fan that I put her (girl) and 3 that out (above, behind and at the source which is 12) pressure difference negative between them is too high and need one to stick, preferably as I did, outside air directly on the processor, memory and placa. Am made changes, see pictures atasate. 1. result ...  -5C-3C to CPU temperature and the motherboard and the memory-2C (these are already under your CPU cooler) on average use of 1C and less about each in full load, compared initial 2. noise ... Similarly, not hear (Nexus 120mm, 1000rpm), I got a friend at a service to me after drilling and polishing panel had a bit of paint with deafening I gave dupa 3 panel. not look too bad, you buy a lid/filter to put deasupra Ca and tips for those who want to try something like this: 1. use anevoide have 1 piece of wood or aluminum (minimum 20x20 cm) which was used as a counter when you gaurile 3. paint deafening drum 25 RON 1.5 l (you can give him all the case, but beware of the casing joints, and bays in the thinnest layer) 4. your work: cry: Measuring about 2-3h and drill (carefully) 5. about 10-20 EUR to a boy from a painting, to polish and paint the panel by drilling casing (full) and about 7-8h uscare In waiting for my case was worth, but also changed the case I want to change it pass and the cooling water that does not happen .... follow the https://www.pcgarage.ro/carcase/cooler-master/cm-690-ii-advanced/.
|
|
|
|
|
|
Energy
Guest
|
|
« Reply #3 on: March 24, 2010, 11:32:22 PM » |
|
Energy have the same case as you do a Nexus Clodius Black 1 fan that I put her (girl) and 3 that out (above, behind and at the source is all of 12) negative pressure difference between them is too high and need one to stick, preferably as I did, outside air directly on the processor, memory and motherboard. Am made changes, see photos attached. 1. result ... -5C-3C to CPU temperature and the motherboard and the memory-2C (these are already under your CPU cooler) on average use of 1C and less about each in full load, compared 2 initially. noise ... Similarly, not hear (Nexus 120mm, 1000rpm), I got a friend at a service which I sanded panel by drilling and had a bit of paint with deafening I gave the panel after 3. not look too bad, you buy a lid/filter to put over Ca and tips for those who want to tryUse a drill bit and good (not like me on the battery) work less and faster 2. nevoide have 1 piece of wood or aluminum (minimum 20x20 cm) which was used as a counter when you 3 holes. paint deafening drum 25 RON 1.5 l (you can give him all housing, but be careful to frame joints, and bays in the thinnest layer) 4. your work: cry: 2-3h about measuring and drilling (carefully) 5. about 10-20 EUR to a boy from a painting, to polish and paint the panel by drilling casing (full) and about 7-8h waiting for my case to In drying off, but also a change that changed housing I go on and on cooling water that does not happen .... following https://www.pcgarage.ro/carcase/cooler-master/cm-690-ii-advanced/ you made frumos there:). Speaking of cooling water, cooling guy is dead silent? that is not producing any noise? |
|
|
|
|
|
Ebola
Guest
|
|
« Reply #4 on: March 25, 2010, 09:47:55 PM » |
|
Quieter than the Nexus that's not safe for that depending on how many radiators put on it (I saw 2 radiator systems that must be 120x240 mm 4 noisy fans and usually for the need of those with high static pressure ) and the pump still hear something, it all depends on budget. In my first one to wait as I would change my monitorul. Avantajul temperatures they have the processor and video card, but not necessarily in the full idle load. Ca idea, my new toy II Advanced is 690 CM hear something now (but I put on it 4 3 Venturi 140 mm 120 mm + 1 source and 1 to put the cooler on your CPU fan conroller almost all) the CPU is less than 2 degrees instead video card I do not salt or forged within 65C before 75C. Cand salt to finish a wired it to put pictures |
|
|
|
|
|
Energy
Guest
|
|
« Reply #5 on: March 25, 2010, 10:23:03 PM » |
|
quieter than Nexus' s not sure, for it depending on how many radiators put on it (I saw 2 radiator systems that must be 120x240 mm 4 noisy fans and usually for the should those with high static pressure) and the pump still hear something, it all depends on budget. In my first one to wait as I would change my monitorul. Avantajul temperatures they have to processor and video card, but not necessarily in the full idle load. Ca idea, my new toy II Advanced is 690 CM hear something now (but I put on it 4 3 Venturi 140 mm 120 mm + 1 source and 1 to your CPU cooler fan conroller put on almost all) the CPU is less than 2 degrees instead video card I do not salt or forged within 65C before 75C. Cand salt to finish the wired one to put pictures of her master sa healthy housing. I had thought me a hand on it now (Nexus Clodius) with Cooler Master 500 Sileo. I think it's the most solid case that we read and which antifoneaza and best, is made from steel, with more than 10 kg. The design does not impress her. But I like it's solid. Do not know what to do. I do not give too much money on it. It will stay at this ?:-?? |
|
|
|
|
|
Ebola
Guest
|
|
« Reply #6 on: March 25, 2010, 11:00:53 PM » |
|
From what I've been looking at it not worth Pro: would be like having the 3 removable lower bays, you can put video cards in May-Antiphonary mari side walls and plafonului Contra: -intake fan at the front than on foot plus I think that if you give the 3 bays outside why not have it prinzi -poor ventilation, heat and no longer remove the material ala ciuciu izolant -Cable management-if you put a video card that healthy will remove heat lot: cry: salt temperature casing vezi Eu I suggest you not to amend a little of yours, about what I did, you put 1-2 Nexus fans at 1000 rpm (is quiet good) an antiphon, but the paint and you lost the problems, if you do not put a GTX 285-295 on it (which I do not think fit  ) My A before removing it is not heard with 6 120mm fans on it, and the temperatures were decent even in games like STALKER, Crysis. |
|
|
|
|
|
Energy
Guest
|
|
« Reply #7 on: March 26, 2010, 12:16:13 AM » |
|
somehow know where I can get paint for soundproofed? You have given the paint and inside the chassis?
|
|
|
|
|
|
Ebola
Guest
|
|
« Reply #8 on: March 26, 2010, 01:00:56 AM » |
|
how come on the market Alecsandri to jail is a paint shop on the right, but also to others like that
Eu the case given that I've never changed it, but I saw the mouth from a friend and was OK
|
|
|
|
|
|
Energy
Guest
|
|
« Reply #9 on: March 30, 2010, 09:21:05 PM » |
|
how come on the market Alecsandri to jail is a paint shop on the right, but also to others like that
Eu the case given that I've never changed it, but I saw mouth from a friend and it was OK ok. ms |
|
|
|
|
|
JediMindTricks
Guest
|
|
« Reply #10 on: April 01, 2010, 12:08:31 AM » |
|
Water cooling system you can be very quiet or very noisy. The pump can be heard scarcely a system. Fans can be very quiet because they are optimized radiators low rpm fans. In a silent cooling system you can hear water flowing into the reservoir.
|
|
|
|
|
|
Cobra2000
Guest
|
|
« Reply #11 on: April 01, 2010, 12:15:32 AM » |
|
Energy have the same case as you do a Nexus Clodius Black 1 fan that I put her (girl) and 3 that out (above, behind and at the source is all of 12) negative pressure difference between them are too high and need one to stick, preferably as I did, outside air directly on the processor, memory and placa. Am made changes, see pictures atasate. 1. result ... -5C-3C to CPU temperature and the motherboard and the memory-2C (these are already under your CPU cooler) on average use of 1C and less about each in full load, compared initial 2. noise ... Similarly, not hear (Nexus 120mm, 1000rpm), I got a friend at a service to me after drilling and polishing panel had a bit of paint with deafening I gave dupa 3 panel. not look too bad, you buy a lid/filter to put deasupra Ca and tips for those who want to try something like this:Use a drill bit and good (not like me on batteries) work less and more repede 2. nevoide have 1 piece of wood or aluminum (minimum 20x20 cm) which was used as a counter when you gaurile 3. paint deafening drum 25 RON 1.5 l (you can give him all the case, but beware of the casing joints, and bays in the thinnest layer) 4. your work: cry: Measuring about 2-3h and drill (carefully) 5. about 10-20 EUR to a boy from a painting, to polish and paint the panel by drilling casing (full) and about 7-8h uscare In waiting for my case was worth, but also changed the case I want to change it pass and the cooling water that does not happen .... follows https://www.pcgarage.ro/carcase/cooler-master/cm-690-ii-advanced/ sau, good cooling if you try to [url]http://www.magiccomputers.ro/carcasa-nzxt-gamma-p-13866.html?osCsid=04u4la7p9ir2r9tsl2c7158ab4 [. |
|
|
|
|
|
Ebola
Guest
|
|
« Reply #12 on: April 01, 2010, 06:33:36 AM » |
|
Daca I would have been silent and cold housing were holding the old housing, Nexus Clodius, after modifications made by me had her 7 120mm fans, all except source Nexus (1 front, 1 rear, 1 top, 1 side 1 got the HDD cage to push air directly into the cooler video card and 1), all standing in a little 700rpm with the exception of the cooler 1600 rpm and the temperature 29-55C CPU, GPU, 46-65C, 27C HDD not salt salt source and motherboard at 32-35C constant, and that sound nothing, dead silent Noua case is just the temperature but is more spacious, it
|
|
|
|
|
|
JediMindTricks
Guest
|
|
« Reply #13 on: April 01, 2010, 02:58:43 PM » |
|
Here is great right, better get a more powerful CPU cooled by air. Much luck!  |
|
|
|
|
|
